Applications
The device is suitable for plastic additives, food additives, chemical additives, stearic acid, monoglyceride, paraffin and other solid, fat powder, palm oil, polyethylene resin, amino fatty acids, paraffin, glycerol fat, , Food additives, plastic additives, such as melting chemical materials spray cooling granulation, the indicators have reached the international advanced level, to meet customer requirements on the size of the product.
Technical characteristics
1, the special design of the vortex air distributor, based on aerodynamics and hydrodynamic basic principles, and strengthen the cold air and hot melt droplets between the quality of heat exchange, while the system into the wind using the counter-flow way to ensure that hot melt Droplets are fully cooled by cold air to complete the cooling granulation process.
2, granulation tower jacket cooling device to ensure that the granulation tower wall does not occur material "hot melt wall" phenomenon. "Low-hat" exhaust structure device to ensure that more than 90% of finished products in the bottom of the granulation tower to be collected, only a small amount of powder into the cyclone, reducing the cyclone separator gas-solid separation pressure.
3, into the granulation tower system of air all through the early, middle and high efficient three-level filtration, purification level to three hundred thousand or more.
4, the inner wall of the granulation tower, the powder pipe, the cyclone separator material selection SUS304 / BA mirror stainless steel plate, weld all Argon protection welding, polished polished weld, polishing accuracy of 0.3μ, effectively prevent the pipeline " Product accumulation of powder "phenomenon. The powder pipe and the cyclone separator are equipped with quick-opening washing mouth, which is easy to disassemble, clean, disinfect and sterilize, and fully accord with food hygiene requirements.
5, the product recovery system with a special secondary fluidized bed cooling and drying device, the completion of the zero-granulation of the powder re-cooling and then dry, fully cooled and dried finished product mobility, low temperature, can be directly packaged.
